Main parameters and performance: main sound: 8 Ω 600W. 4 Ω 1000W. 2. 7 Ω 1800W
Protection function: DC protection, short circuit protection, current limiting voltage protection, temperature limiting protection
Total harmonic distortion of 1kHz and less than 1dB clipping: < 0.09%
Total harmonic distortion 20Hz-20KHz 1W: < 0.058%
SNR: > 110 DBA
Signal channel separation (crosstalk) at 1kHz: > 70 dB
Frequency response 1 watt 8ohm, 20 hz-20khz: + / - 0.05 dB
Damping control: > 400 8OH / 1kHz
Input impedance balance / unbalance: 20 / 10 kohm
Amplifier gain: 34 dB
Analog channel: 3-pin XLR (including 2 × 3 audio link output), electronic balanced input (Neutrik terminal)
Output connector: speaker Neutrik (2 x nlt4) (neutral terminal)
Cooling: front and rear airflow, temperature control speed
Power on / off: a single switch on the front panel
Control: each channel is equipped with a level attenuator
Indicator light: independent LED indicator for each channel; 1 x switch / standby LED (green), 6 X signal LED (green); 2 x device activated LED (yellow), 2 x protection activation (red), 1 x overheat limit (yellow)
Maintenance: dust filter sponge on the back of front panel
Nominal voltage: 220 volt AC 50 Hz
Working voltage: 190-250v AC
Soft start / power: Yes
Rack rail to rear panel: W: 483mm (19 "), H: 88. Mm (2U), D: 488 mmW:483mm (19"),H:88mm (2U),D:488 mmW:483mm (19"),H:88mm (2U),D:488 mmW:483mm (19"),H:8.8 mm (2U),D:488.
Case appearance structure: black painted steel chassis / aluminum front